This is one of the cheapest genuinely useful things in my house. The Philips Outlet Extender two-pack does one job with no fuss: it turns the outlets you already have into more outlets, and it does it without a cord, a power strip, or a single tool. If your problem is “too many plugs, not enough wall,” this is the fix.
As an Amazon Associate I earn from qualifying purchases. I bought this product myself.
Quick verdict: is the Philips Outlet Extender worth it?
Anyone with a wall outlet that’s run out of receptacles — a desk corner, a bedside table, a kitchen counter, a dorm room. You get two grounded 3-outlet taps, rated for 125V/15A/1875W, and each one keeps the receptacle below it free, so a standard wall plate goes from two usable plugs to four. There’s nothing to install, nothing to configure, and it costs about as little as an outlet accessory can. For the money, it’s an easy yes.
Why I bought it
My reasoning was pure math: it was as cheap as it gets, and I had outlets that needed help. Two taps in the box, three outlets apiece — six new plugs of total capacity for pocket change. The other selling point is how the tap sits sideways across the top receptacle: the one below stays clear, so each tapped outlet effectively becomes a four-outlet spot. This wasn’t about a surge protector or a six-foot power strip — it was about more places to plug things in right where the outlet already is.
That combo — near-zero cost, six outlets, no installation — made it an instant buy. It’s the kind of purchase you forget you made until the day you need a fourth plug and it’s already there.
What it’s like to use
You plug it into the top receptacle and you’re done. No tools, no app, no pairing. The horizontal layout is the whole design decision that matters: instead of a bulky cube that covers both receptacles, the tap sits flat against the wall across the top, leaving the bottom one open for whatever’s already plugged in there.
In practice, each half of the two-pack turns one wall plate into four usable plugs — three on the tap plus the free receptacle below. The listing rates each tap for 125V, 15A, and 1875W, which is the same ceiling as a standard US household circuit, and that covers everything a wall tap is actually for: chargers, lamps, a TV, a laptop brick, holiday lights. Grounded three-prong connections throughout, standard Type B North American plug.
The listing also notes it’s UL safety listed and ETL certified, with a limited-lifetime replacement plan from Philips. For a device that lives in your wall and touches mains power, the certification listing matters more than any feature — it’s the spec I’d check first before buying.
There’s no drama to report: it’s the kind of product that disappears into the wall and does its job. The white molded body blends in, and a wall tap has no mechanism to fail — it’s essentially three sockets and a plug, which is exactly why cheap makes sense here. There’s no electronics inside to pay for.
Key specs
| Model | Philips SPS1630W/37 (manufactured by Jasco Products) |
| What you get | 2-pack — two grounded 3-outlet wall taps |
| Total outlets | 6 (3 per tap) |
| Design | Horizontal — sits across the top receptacle, keeps the bottom one free |
| Power rating | 125V, 15A, 1,875W max |
| Plug format | Standard grounded 3-prong (Type B, North American) |
| Certification | UL safety listed, ETL certified (per the listing) |
| Warranty | Limited-lifetime replacement plan |
| Finish | White, molded construction |
Specs per the Amazon listing. check current price on Amazon
Who should skip it
If you need to run something that pulls serious current — a space heater, a microwave, a hair dryer on high — skip any basic wall tap, this one included, and use a dedicated outlet. If what you actually need is more reach, not more receptacles, buy an extension cord instead; this adds outlets, not length. And if you were hoping for USB ports or surge protection, this is a plain grounded splitter — those exist, and this isn’t one.
FAQ
Does the Philips 3-outlet extender keep the bottom outlet usable?
Yes — that’s the design’s best trick. The tap sits horizontally across the top receptacle, so the bottom receptacle stays clear instead of being blocked like it is with most cube-style adapters. A normal two-plug wall plate effectively becomes four usable plugs: the three in the tap plus the free one below.
How much power can the Philips outlet extender handle?
The listing rates it 125V, 15A, 1875W — the same limit as a standard US household circuit, so it won’t be the bottleneck in normal use. Chargers, lamps, TVs, and small electronics are all fine. High-draw appliances like space heaters or microwaves are not — use a single dedicated outlet for those.
Is the Philips outlet extender safe to leave plugged in permanently?
Per the listing, it’s UL safety listed and ETL certified, and it uses standard grounded three-prong connections. Wall taps are designed to stay put — no need to unplug it between uses. Respect the 1,875W ceiling, avoid daisy-chaining extender into extender, and there’s nothing special to worry about.
Bottom line
This is the least glamorous thing I’ve bought all year and one of the most quietly useful: two taps, six outlets, four usable spots per wall plate, nothing to install. It’s as cheap as it gets and it does the job, which is exactly what I wanted from it. check current price on Amazon